Hands-on review

BISSELL CrossWave OmniForce EdgeFind Review: A Capable Vacuum Mop for Hard Floors

Our BISSELL CrossWave OmniForce EdgeFind review after a week on tiled floors with a golden retriever. It shifted dried mud in a couple of strokes and caught plenty of dog hair, though it's not a premium build and still needs a clean after every mop.

The BISSELL CrossWave OmniForce EdgeFind's headlights lighting up a tiled floor in front of a golden retriever lying in a hallway
On this page
  1. First impressions in short
  2. What’s in the box
  3. Design and build
  4. Charging and battery
  5. Using it
  6. Mopping: mud and paw prints
  7. Vacuuming and dog hair
  8. Cleaning up afterwards
  9. How it compares
  10. Price and where to buy
  11. Should you buy it?

BISSELL sent us this vacuum mop to review. They didn’t see this review before it went live.

Hard floors and dogs are a messy combination. Our tiles collect dog hair, muddy paw prints and the odd dried-on mark, and keeping on top of it with a separate vacuum and mop takes time. The BISSELL CrossWave OmniForce EdgeFind (model 4325F) is a cordless wet and dry cleaner that vacuums and mops in one go, with a charging base that also cleans it out afterwards.

We’ve used it for a week on the tiled floors of a home with a golden retriever. We’ve also used the Tineco Floor One S7 Pro, a similar machine, so we can say how the two compare.

Everything in the BISSELL CrossWave OmniForce EdgeFind box laid out on a tiled floor: the cleaner, the handle, the charging and storage base with its power pack, a spare filter, the quick-start guide and two bottles of BISSELL cleaning solution

First impressions in short

The CrossWave OmniForce EdgeFind is a capable everyday vacuum mop. It shifted mud stains, paw prints and older dried-on mud in a couple of strokes, and its hair strainer caught a lot of dog hair. It’s reasonably well made, with a metal shaft and good ergonomics, but it’s more plasticky than a premium model like the Tineco S7 Pro. Like every machine of this type, it needs taking apart and cleaning after each mop. For the price, we think it’s good value, and we’ll keep using it.

Pros

  • Removed mud stains, paw prints and older dried mud in a couple of strokes
  • Collected a lot of dog hair and filtered it out well
  • Vacuums well on its own for light, everyday clean-ups
  • Lightweight, with a metal shaft and comfortable ergonomics
  • Base charges it and holds the accessories, which can dry there too
  • Charged from 22% to full in about 2 hours, and a 20-minute clean from full left 64% battery
  • The included cleaning solution smells pleasant and seemed effective

Cons

  • More plasticky than premium rivals, with a lower-quality screen than the Tineco S7 Pro
  • No powered drive to help push it back and forth, so it can feel a little cumbersome
  • Not strong enough to replace a proper vacuum in a home with heavy dog shedding
  • Needs taking apart and cleaning after every mop to keep it smelling fresh

What’s in the box

In our box were the cleaner, the handle, the charging base with an Australian power pack, a spare filter, a quick-start guide and two bottles of BISSELL solution: Multi-Surface Pet and a hard floor solution. The base does more than charge the cleaner. It holds the accessories and gives everything somewhere to dry after a clean.

Design and build

The CrossWave is reasonably well made, but you can tell it’s not a high-end, premium version of this type of product. We’ve used the Tineco Floor One S7 Pro before, and it felt a little more premium, with a higher-quality screen and lighter, more premium materials.

That said, the BISSELL is still well built. The shaft is metal, the ergonomics are good, and it’s comfortable to hold. It’s a bit plasticky in places, which is fine at this price, but worth knowing.

The purple and black body of the BISSELL CrossWave OmniForce, with the CrossWave OmniForce name on the front

The controls sit on the handle: three buttons for the modes and power, plus a trigger under your finger for releasing cleaning solution. A colour display on the body shows the battery level, the solution level and the suction level.

The three control buttons on the BISSELL CrossWave handle, with a cat walking along the couch in the background

The solution trigger on the back of the BISSELL CrossWave handle

Charging and battery

The CrossWave charges standing in its base. Ours went from 22% to 100% in about 2 hours. BISSELL lists a 64.75 Wh lithium-ion battery on the box. Starting from a full charge, after a 20-minute clean the display still showed 64% battery, so a normal clean of our tiled floors leaves plenty in reserve. We’ll time a full run until it’s flat in an update.

The BISSELL CrossWave display showing the battery at 22% and charging, with rings for the solution and suction levels

Using it

The CrossWave is quite lightweight, but it can feel a little cumbersome to move around. Some Tineco models have a powered drive that helps push the head backwards and forwards. The BISSELL doesn’t seem to have one, so you do the pushing yourself. It’s still perfectly easy to use.

The floorhead has LED headlights across the front, which BISSELL calls FurFinder. They light up the floor just ahead of the head, which helps you see what you’re cleaning.

The BISSELL CrossWave floorhead on a tiled floor, showing the soft brush roll behind a clear cover

Mopping: mud and paw prints

Mopping is where the CrossWave impressed us most. It removed mud stains and footprints with ease. It also lifted some heavier mud that had been on the tiles for a while, and it did it in a couple of strokes.

A tiled floor with dried muddy paw marks and dog hair, before cleaning with the BISSELL CrossWave

Here’s another patch, by a doormat, before and after a clean. The muddy paw prints and loose hair on the tiles were gone afterwards.

Muddy paw prints and dog hair on tiles next to a doormat, lit by the BISSELL CrossWave's headlights, before cleaning

The same tiles next to the doormat after cleaning with the BISSELL CrossWave, with the paw prints and hair gone

The included cleaning solution smells pleasant and seemed to work well. We’d still treat this as a cleaner for everyday mess. If the dogs bring in a lot of mud, or there’s a lot of dirt to deal with, you may want something more heavy-duty.

Vacuuming and dog hair

The CrossWave vacuums very well by itself. You could use it as a standalone vacuum if you don’t need to do heavy vacuuming. In our house, though, with a dog that sheds constantly, it isn’t enough to replace our proper vacuum.

It did collect a lot of dog hair while mopping, and it filtered the hair out of the dirty water extremely well. BISSELL calls this its pet hair strainer, and it’s a big help in a home with pets.

The BISSELL CrossWave's dirty-water tank after a clean, full of grey water and dog hair

The BISSELL CrossWave's hair strainer covered in dog hair after a clean

Cleaning up afterwards

This is the least fun part, as it is with every vacuum mop we’ve used. You have to take things apart to clean them. That’s easy to do, but you should do it after every mopping session to keep the CrossWave clean and smell-free. The clean-water tank lifts out for filling, and BISSELL lists a self-cleaning cycle that runs with the cleaner in its base.

The BISSELL CrossWave clean-water tank removed and lying on a tiled floor

The floorhead comes apart easily too. After a clean there was dog hair stuck to the inside of the clear cover, so it’s worth a rinse along with the brush roll.

The BISSELL CrossWave floorhead opened up, with the brush roll exposed and the clear cover removed, showing dog hair on the inside of the cover

The inside of the BISSELL CrossWave's clear floorhead cover, coated with wet dog hair after a clean

How it compares

Tineco Floor One S7 Pro: It feels more premium, with a better screen and lighter, higher-quality materials, and some Tineco models help drive the head along for you. The BISSELL is more plasticky but still well built and good at the job. Read our Tineco Floor One S7 Pro review.

A separate stick vacuum and mop: If your home has heavy pet shedding, you’ll still want a proper vacuum. See our guides to the best stick vacuums, the best pet vacuums and the best mops.

Price and where to buy

BISSELL lists the CrossWave OmniForce EdgeFind at A$699 on its Australian store. It’s worth checking retailers such as The Good Guys and Bing Lee for sale prices. Your rights under Australian Consumer Law apply on top of BISSELL’s warranty.

Should you buy it?

Yes, if you have hard floors and want a quicker way to keep on top of everyday mess. After a week, we’ll certainly keep using it. It shifts mud and paw prints easily, it handles dog hair well while mopping, and we think it’s good value for the price.

Look elsewhere if you want a premium build and a better screen, or if you need a heavy-duty cleaner for a lot of mud and dirt. In a home with heavy pet shedding, you’ll still need a proper vacuum alongside it. We’ll add a timed battery run and longer-term impressions in an update.